FTTH SC / UPC SM 3.0mm Fiber Optic Field Assembly Fast Connector
Description:
The fast connector is a connector that can well solve the wiring
operation and the FTTH project. Assembly without glue, grinding and
electrical tools ,which is widely used in the construction site. It
provides a fast and stable connector for operation.
Optical Fast Connector takes use of the latest generation of
Terminal technology. After terminating, both optical and mechanical
performance reach the standard for patchcord, meet the demand for
making patchcord on site by mechanical splicing, have greatly
changed the idea in conventional optical splicing, providing the
great support to FTTx implementation.
Specification:
| Singemode(UPC) | Singemode(APC) | Multimode |
| Insertion loss | ≤ 0.2db | ≤ 0.2db | ≤ 0.25db |
| Return loss | ≥55db | ≥65db | ≥30db |
| Durability | ≤ 0.2db typical change, 1000 times mating |
| Operating Temperature | -45 to +85 degree |
| Ferrule Hole Sizes | 125.0+1/-0um, Concertricity:≤1.0um | 125.0+1/-0um, Concertricity:≤0.5um | 127.0um, Concertricity: ≤3.0um |
| 125.5+1/-0um, Concertricity:≤1.0um | 125.5+1/-0um, Concertricity:≤0.5um | |
| 126.0+1/-0um, Concertricity:≤1.0um | 126.0+1/-0um, Concertricity:≤0.5um | |
Cable Scope | 2.0mm/3.0mm/3.1*2.0mm cable |
Optical fiber diameter | 125μ m ( 652 & 657 ) |
Tight buffer diameter (μ m) | 900μ m |
Fiber mode | Single & multi mode |
Installation time | within 60s ( no fiber cut ) |
Insertion loss | ≤ 0.3dB(1310nm & 1550nm) |
Return loss | > 55dB |
Fastening strength of naked fiber | > 5N |
Fastening strength of naked fiber holder | > 10N |
Tensile strength | > 50N |
Working Temperature | -40~+75 |
Features:
1. Eliminates cable excess length and pigtail splice storage
2. Factory-installed fiber stub
3. No epoxy or polishing required
4. Quick and easy fiber termination in the field
5. No tool is required for the installation
6. Cost effective
Application:
Distribution frames
Maintenance or emergency restoration of fiber networks
FTTH Outlets
Patch panels
Data processing networks
Video and military active device termination
Optical Distribution Frame
Optical Network Equipments
Operation steps as follow:
1> Ensure that the switch is completely opened down and insert the
optical fiber to make it slightly curved and push to the limit.
2> Keep slightly bending and tighten the boot first
3> Uplift switch
4> Put on the blue housing, finish the assembly
