SFP Slots 10/100/1000M Gigabit Ethernet SFP Media
Converter/10/100/1000 M Media Converter SFP Port Fiber Converter
Description:
The series of Ethernet optical transceivers can convert the twisted
pair signal and optical fiber signal of Ethernet to each other
through SFP optical fiber module. The transmission distance of the
network can be extended from 100 meters to 120 kilometers. The
interconnection between HUB, SWITCH, servers, terminals and remote
terminals can be easily realized. SFP Ethernet fiber transceiver is
plug-and-play, which can be used by a single computer or integrated
with multiple computers in the same chassis. At the same time, SFP
module can be hot-plugged to facilitate users to adjust and replace
at any time according to the actual situation.
Fiber-optic transceivers have six LED indicators that display the
working state of the transceiver. According to the LED, it is
possible to determine whether the transceiver is working properly
and what problems it may have, thus helping to identify the faults.
Their functions are as follows:
PWR: the light indicates that the DC5V adapter works normally.
FX100: light indicates that the optical fiber transmission rate is
100Mbps.
FXLink / Act: The light often indicates that the optical fiber link
is connected correctly; the light flashing indicates that there is
data transmission in the optical fiber;
Fdx: the light indicates that the optical fiber transmits data in
full duplex mode.
TX100: the light indicates that the twisted pair transmission rate
is 100Mbps.
The light does not indicate that the transmission speed of twisted
pair is 10Mbps.
TX Link / Act: A light often indicates that the optical fiber link
is connected correctly; a light flash indicates that data is being
transmitted in the optical fiber.
The Gigabit Adaptive Transceiver with a Gigabit SFP port and a RJ45
port can meet the needs of users.
Choose different Gigabit SFP modules (1000Base-T, 1000Base-SX,
1000Base-LX, etc.). Modules include Gigabit single mode single
fiber / Gigabit single mode dual fiber / Gigabit multimode dual
fiber.
Technical Specifications :
| Technical Parameters for 10/100/1000M Adaptive Fast Ethernet
Optical Media Converter |
|
| Number of Network Ports | 1 channel |
| Number of Optical Ports | 1 channel | |
| NIC Transmission Rate | 10/100/1000Mbit/s | |
| NIC Transmission Mode | 10/100/1000M adaptive with support for automatic inversion of
MDI/MDIX | |
| Optical Port Transmission Rate | 1000Mbit/s | |
| Operating Voltage | AC 220V or DC +5V | |
| Overall Power | <3W | |
| Network Ports | RJ45 port | |
| Optical Specifications | Optical Port: SC, LC (Optional) Multi-Mode: 50/125, 62.5/125um Single-Mode: 8.3/125, 8.7/125um,
8/125,10/125um Wavelength: Single-Mode: 1310/1550nm |
| Data Channel | IEEE802.3x and collision base backpressure supported Working Mode: Full/half duplex supported Transmission Rate:
1000Mbit/s with error rate of zero |
Key Features
Fiber-optic transceivers can be used anywhere in the network to
integrate updated technologies with existing devices, and
fiber-optic transceivers can extend existing cables.
Simple design, high reliability and low power consumption.
The modular structure design can be concentrated on the power
supply rack.
A SFP socket is provided, and SFP module can be selected freely to
realize single / multi mode and different transmission distance.
Support hot swap, plug and play;
Ultra low delay data transmission, network protocol transparent
transmission;
It supports store and forward mode, and supports ultra long
packets, up to 9720 bytes, with built-in 128K buffer.
Support IEEE802.1Q, support cross switch VLAN, TRUNK;
Port supports Auto-MDI/MDIX auto flip.
Support IEEE802.x, port traffic and back pressure control and
secure user authentication;
Support port VLAN, port mirroring. IPV6 port mirroring traffic 4K,
Trunking based on MAC;
Automatic link effective transfer, dual Tagging/QinQ;
Support generation number and loop detection, IGMP, MLD;
It has the function of link alarm (LFP) to automatically detect the
link interruption when any port in the link is disconnected.
The built-in lightning protection circuit can greatly reduce the
damage caused by lightning induction.
The average no fault working time is more than 50 thousand hours.
Application
FTTH System
Apartment to building
Monitoring and spy system
Detailes:
High quality chip, photoelectric integrated module transmission
faster and more stable
Double ventilation design ensures good chip operation.
